Using a T30 Torx bit and a small ratchet, you want to remove eight Torx bolts that hold this panel. We use MailChimp as our marketing automation platform. You can see that latch mechanism came right up. I'm going to fast forward through putting this panel back on. Please feel free to call us toll-free, 888-844-3393. Go Industries is a market leader that specializes in Jeep and truck products including grille guards, racks and bed rails and also provides enthusiasts with other related aftermarket accessories.
The only tools you'll need are a T30 Torx driver with a ratchet and you'll also need an 11mm socket with a ratchet, and then some penetrating oil and white grease to lube up the latches and stuff will also help. You will want to transfer your lock over. Make sure that this part gets up above here and on. You want to clean up this with some penetrating oil and put some white grease on it. You'll want to take that wire retainer all the way out and the lock comes out. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.
Make sure everything's free and use some white grease sprayed on there. I'm going to hit fast forward here as I remove those bolts. I'm just pulling down from the bottom and flipping my handle out. . Take a small screwdriver, work it right in there, and push out on the lock.
We hope this video helps you out. Now, the new handle goes right up in. For more information about our privacy practices, please read our. I mentioned it briefly, but while you have that panel off check all your mechanisms, use some penetrating oil or whatever to free them up. You can see it's exactly the same. Here's our old handle, and new handle from 1A Auto. By submitting this form, you acknowledge that the information you provide will be transferred to MailChimp for processing in accordance with their and.
There's two 11 bolts or nuts right here, remove those. We're the company that's here for you on the Internet and in person. So check AutoTrust's product listings now and replace your damaged tailgate today! Start one of the nuts and the other one and adjust. Tighten them nice and firm. In this video, we're going to show you how to replace the tailgate handle on this '03 F250, same as any Super Duty truck from this era. Here's the back of your handle. It is Electro Deposit Primer coated for durability and 500 to 1000 hours salt-sprayed tested for rust protection.
Make sure all your latches and everything are nice and free. You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at. Brought to you by www. Start the screws individually by hand first, and then use your T30 Torx driver and ratchet. You can leave the retainer in your new handle, just push the lock right in. Replacement Direct Fit Tailgate is machined from heavy-gauge steel.
Somebody's already done it previously so I'm not going to put a whole bunch more grease. Go Industries is a market leader that specializes in Jeep and truck products including grille guards, racks and bed rails and also provides enthusiasts with other related aftermarket accessories. It doesn't have to be too tight. A lot of times these handles will break, just because of bad latches or whatever. . .
. . . . .